DBI/SALA Anchorage Connectors 

DBI/SALA manufactures the industry's widest range of anchorage connectors, combining ease of use, light weight and high strength (5000 lb. min. tensile strength). No matter what you are connecting to,
DBI/SALA has a connector to get the job done
and deep you safe in case of a fall.

Tie-off adaptor provides anchorage point for your fall protection system.

D-ring anchorage plate - bolt or weld to structure for and easy to use anchorage point.

Designed for use with self-retracting lifelines on
horizontal I-Beams.

First-Man-Up™ system includes tie-off adaptor and hook attachment heads, a 6 ft. to 12 ft. in length adjustable pole, 3 ft. tie-off adaptor,
carrying bag and instructional video.

Scaffold Choker with D-ring provides a quick compatible connection to structures like scaffolding.

EZ Stop® II Shock absorbing lanyard with 1-inch polyester web and self locking snap hook at one end and girder grip at other end, 5 ft. in length.

DBI/SALA Roof Anchors

Roof Anchor Fall Protection Kit comes complete with everything needed including removable/reuseable roof anchor, harness, rope adjuster and lanyard, lifeline, counterweight and carrying bag.

Sayfline™ Roofer's System comes complete with everything needed including removable/reuseable roof anchors, harness, rope adjuster and lanyard, lifelines, counterweight and carrying bag.

Removable/Reuseable Roof Anchor provides anchorage connector on flat or sloped wood roof structures.

Single-Mount Roof Anchor provides anchorage connector on flat or sloped wood roof structures.

Detachable Roof Anchor provides anchorage connector on flat or sloped wood roof structures.

Permanent Roof Anchor provides anchorage connector on flat or sloped wood roof structures.

Rope adjuster at one end of EZ stop® III shock absorbing lanyard lets you safely slide along a lifeline to reach a new work position and then locks onto lifeline
to provide fall protection. 

DBI/SALA Beam Anchors 

Glyder™ Sliding Beam Anchor provides tie-off point overhead or at your feet and follows you sliding across the beam.

Fixed Beam Anchor specifically designed for fall arrest anchorage, can be installed in any orientation or direction.

 Miller Anchorage Connectors  

Designed to facilitate anchoring to scaffolding, pipe or angle iron, the 480 features a large snap hook with a 2-1/2 inch throat opening for easy, one-hand installation and a D-ring to accommodate the connecting device. No tools required.

 Miller Anchorage Connectors  

The Miller cross-arm strap is designed to wrap around I-beams and other structures forming a secure attachment point for lanyards and other connecting devices. Manufactured from 2 inch nylon webbing for maximum strength, the strap features a 2 inch forged D-ring which slips through a 3 inch D-ring. Standard length is 6 feet; other lengths available upon request.