DBI/SALA Positioning & Restraint Lanyards 

Every DBI/SALA lanyard combines super strength and ease of use without sacrificing safety. All lanyard hardware is proof tested to meet or exceed industry standards before you even get it. Standard on all DBI/SALA lanyards are our patented, user-friendly self locking snap hooks. They allow you to open and close the hook even with gloves on without getting your thumb or fingers in the way, they're industry prefered!

Rope Lanyard, 1/2" nylon construction with self locking snap hooks at each end, 6 ft. in length.

Web Lanyard, 1" polyester construction with self locking snap hooks at each end, 6 ft. in length.

Rescue Y-Lanyard, with self locking snap hooks at each end and a D-ring in the center, complete with spreader bar, 2 ft. in length.

Rescue Wristlets attached to Y-lanyard for rescue/retrieval applications.

Our chain rebar lanyards are designed for versatility and are available in many variations with unique hooks to provide safe and compatible connection to many types of structures. Use these positioning and restraint lanyards while performing such tasks as rebar tying or contruction of wall-forms. Like all positioning and restraint lanyards, they should only be used in applications that limit the free fall to two feet or less.

Chain rebar assembly with self locking snap hooks at leg ends and swiveling aluminum hook with 2-1/4"
opening at center.

Wall-Form Hook/Chain Y-Lanyard assembly with a wall-form hook at the center and self locking snap hooks at each leg end, 16 inches in length.

Miller Positioning & Restraint Lanyards

Rope grabs are to be used with independent lifelines. A 3/4-inch or 5/8-inch synthetic lifeline with a minimum tensile strength of 5,000 pounds must be secured to an anchorage point independent of the worker's platform. A rope grab will move up or down the vertical lifeline easily, yet it will lock instantly when activated by a fall.

• Constructed of plated steel, the rope grab features an attached 4-foot Manyard shock-absorbing lanyard and a plated locking snap hook with a 3/4-inch throat opening. Accommodates 3/4-inch or 5/8-inch rope tunnel.

The Miller® Retractable Webbing Lanyard is designed with 10 feet of polyester webbing. Designed with an inertia-braking mechanism that locks instantly. Complete with a top swivel ring and a plated locking snap hook with a 3/4 inch throat opening.

• Lightweight retractable webbing lanyard with 10-foot payout, complete with carabineer.

13-link rebar chain assembly with two (2) plated locking snap hooks with 3/4-inch throat openings and one (1) plated locking snap hook with a 2-inch throat opening. Swivel attachment.